Bridge Launcher Erection Crane
- Load 60-160 ton
- Span 30-50m
- Warranty 3 years
- Color Customized
| Bridge Launcher Erection Crane | Moving Speed:4.5m/min | Capacity: 60-160 ton | Warranty:3 years |
| Max Angle of Inclined Bridge：45° | Trolley Speed:0.8m/min | Span:30-50m | Control Method:Remote Control |
Product Description
Bridge Launcher Erection Crane
Beam Launcher is used in the erection of precast beam bridges for span by span method of construction for precast beam girders like U-beam, T-beam, I-beam, etc. This mainly consists of main beam, cantilever beam, under guide beam, front and rear support legs, auxiliary outrigger, hanging beam crane, jib crane and electro-hydraulic system.
Beam Launcher is designed for precast beam assembly without crane assistance,it is widely used for plain construction, can also meet the requirement for mountain building highway slope, small radius curved bridge, skew bridge and tunnel bridge. There are 2 types of Beam Launchers supplied by Shenghua Heavy Crane Group —— the single-box type and the double-truss type. With single or double truss Beam Launcher depending on the requirements of the project and with transport trolleys either on rails or with tyres depending on gradient and length of the bridge.
Product Description
Product
Product Main Features
01:
Light weight, convenient to transportation, installation and removal.
02:
Good stability, high efficiency, safety and reliability, easy to adjust variable cross and easy to operate.
03:
The legs do not through the bridge deck when longitudinal move, no need to lay vertical moving orbit, reduce the pressure on the deck.
04:
Three method picking up the precast beam: from rear end of the beam launcher on the deck level, from below on ground level, or from bridge side
Safety Devices
- Limit switches: These are devices that limit the motion of the crane by stopping it when it reaches a certain point.
- Load sensors: These sensors detect the weight of the load being lifted and ensure that the crane does not exceed its maximum lifting capacity.
- Emergency stop buttons: These buttons are located at various points along the crane's control panel and allow the operator to stop the crane immediately in case of an emergency.
- Anti-collision devices: These devices prevent collisions between overhead cranes and other objects in the vicinity.
- Warning alarms: These alarms are used to alert workers in the area that the crane is in operation.
Parts Of Crane
About Us
Our Factory
1
Production Workshop
2
Customer visit
3
Exhibition
4
ISO Certifiaction
5
CE Certifiaction
6
Our Services:
▶3 years warranty
▶Free distribution of wearing parts
▶Provide assemble videos before shipment
▶Technical support and field installation
Package and Delivery
Packing & Delivery terms:
▶Packing Methods:
▶Electric parts are packed by high quality plywood crate to reduce distortion in conveying
▶Main beams, end beams and electric hoist are packed by plastic woven cloth to reduce abrasion when transport
▶Delivery methods:
▶If the size of beam launcher are suitable for container ship, usually by container
▶If the size is too big, usually by bulk ship or by container after truncation
▶Transport ways are based on reducing cost for you and keep the crane performance
FAQ
-
1How can I get a precise crane offer?
To providing you a precise crane offer efficiently, please kindly provide details as following:
Lifting capacity; material weight(unit as tonnage)
Lifting height; (unit as meter)
Crane span; the width of inquired crane(unit as meter)
Crane traveling length; when rail track/runway beam needed, traveling length shall be provided.
Working power; power source at site(unit as voltage, phase and Hz)
-
2Can I get your crane products with customized/personalized service?
A.Yes, Dowellcrane promise customized/personalized products are available for our clients all the time. Just freely let us know your special demands about the products, our engineering team will work on that.
-
3What should I do if I’m not able to install the crane after buying?
A.Freely contact us. Our engineering team available for oversea service with crane installation, inspection and commissioning.
-
4How long I can receive my crane products after my order placed?
A.Our production will be started once the payment confirmed. Below are timeline for whole procedure
-
5Do you have any additional service on warranty?
A. Yes, we provide “DowellCrae” service about the warranty, the warranty period will extend to two (2) years, full set of spare partsand working tools will delivered with crane for future replacement and maintenance.
FORM
GET THE BUSINESS TODAY
We really want to hear from you! Send us a message using the opposite table, or send us an email. We are
glad to receive your letter! Use the table on the right to send us a message
